Lincoln 1.6mm Outershield MC710Rf-H Mig Wire 16kg

Product description

ONE OF THE LOWEST FUME GENERATING METAL CORED WIRES IN ITS CLASS

Outershield MC710RF-H offers up to a 24% reduction in Fume Emission Rate comparing to Outershield® MC710-H.

Outershield MC710RF-H gives FER between 6 and 8 mg/s when welding at industrial parameters and is definitely one of the lowest fume generating metal cored wires in its class.

Outershield MC710-H is widely applied in industry and has gained popularity because it combines ease of use and high productivity with good mechanical properties. Being one of the best consumables in this group, it reflects typical advantages of metal cored wires:

► Lower welding costs coming from higher productivity, both on CV and advanced pulse modes,
► More flexible and well directed arc, features helping to reduce training time and increase quality of welds,
► Regular and spatter free welds combined with resistance against porosity,
► Similar to GMAW welding techniques and exactly the same types of power sources applied.

Metal cored wire, such as Outershield MC710-H, is a very good solution for thin sheet material, and is also one of the best solutions for semiautomatic welding of multipass welds and thicker plates. Metal cored wire, however, is typically not considered a low-fume generating welding process. Per Figure 1, below, the FER for the MCAW (M21) process is typically lower than the FER of the GMAW (CO2) process and higher than the FER of the GMAW (Pulse)2 process.

Top Features

• All position high efficiency gas shielded metal cored wire

• Excellent arc characteristics give outstanding operator appeal

• Very few silicates, virtually no spatter, fast travel speed, excellent wire feeding

• Superior on scaled plate, good resistance to porosity

• Very good mechanical properties (CVN >47J at -30°C)

• Superior product consistency with optimal alloy control

Technical Specification

Downloads

• 

  osmc710rf-h-eng