Esab Rogue Em 180 Mig/Mma Welding Machine

Product description

Esab MIG/MMA Welding Machine Rogue Em 180 

Delivery includes: ESAB Rogue EM 180A MIG/MAG power source with mains cable 16A plug 3m, MXL 201 MIG Torch Euro 3m, Return cable kit, OKC 35-50 16 mm2, 3m, Gas Hose with quick connect/open 4.5m, ESAB OK AristoRod 12.50 0.8mm 1kg, ESAB GoldRox Electrode, 2.5 x 350mm, 1kg. Feed rolls 0.6/0.8 mm V (fitted), 0.8/0.9mm V and 0.8/0.9mm VK, Safety instruction.

ESAB Rogue EM 180 is an inverter-based MIG welding system designed to address all your welding project needs, from light fabrication to repair and maintenance. The system features industrial-grade arc performance and full featured controls that allow the welder to fine tune arc characteristics based on the material they are welding.

With a weight of only 16.2 kg, 230V single-phase input and compatibility with 10 kVA generators, this system provides maximum flexibility and portability, both in the shop and in the field.

• Large 14 Segment Display –instantaneous feedback for both voltage and wire feed speed for clear viewing

• Synergic Weld Programs –full range of welding parameters, 0.5 –8.0 mm with single knob control

• Power Factor Correction (PFC) –ensures a stable arc, resistant to power fluctuations even while working on long extension cables up to 100 m Unique rugged industrial design –supporting multiple lift points and cable management

• Arc Dynamics –fine tune arc characteristics for a crisp/stiff arc for carbon steel or a smooth/soft arc for stainless steel

• Spool Gun Ready – Rogue automatically configures set up when spool gun is connected.

• IP23S rated for indoor/outdoor use

Do you also need mig welding wire? See our full range of mild steel mig welding wire, flux cored wire, stainless steel mig wire, hard facing mig wire and much more in a range of sizes from 5kg, 15kg, 16kg, 18kg spools and 250kg and 500kg drums in 0.8mm, 1.0mm or 1.2mm

Technical Specification

Downloads

• 

  XA00273820_Rogue-EM-180_Fact_Sheet_GL_EN