New Product Releases

Manual plasma cutting made easy

After two long years of development, the HandyPlasma has finally arrived –
a light and portable hand-held plasma cutting machine, weighing only 13.5kg (including the torch), with a 220V 50/60Hz single phase power supply. The interface not only incorporates the latest technology in a colour LCD panel, but also simplifies every cutting setup. With a single knob, the operator can select each function to meet any need.

Available in two models.

MANUAL PLASMA CUTTING MADE EASY.
HandyPlasma is the introductory manual plasma cutter that is powerful enough to handle tough cutting jobs without dealing with complicated set-up and operation.
Cut through mild steel, stainless steel or aluminuim grates and plates with ease.

Available in two versions to meet your required thickness level:

HandyPlasma 35i and HandyPlasma 45i
Recommended cut – 12 mm Recommended cut – 15 mm
Maximum cut – 16 mm Maximum cut – 24 mm

Delivery includes: Handy plasma 45i machine, plasma torch, 3m work lead with ground clamp, shoulder strap, compressed air connector and air filter wrench.

Hand-held, light and portable power source for plasma cutting with a 220V 50/60 Hz single phase power supply.

Very simple to use, with a colour LCD panel and all adjustments in just one knob.

No need to adjust the gas – the machine automatically detects the inlet and outlet pressure. An automatic system purges gas after cutting, increasing the useful life of the consumables.

The interface not only incorporates the latest technology in a colour LCD panel, but also simplifies every cutting setup. With a single knob, the operator can select each function to meet any need.

MANUAL PLASMA CUTTING MADE EASY.
HandyPlasma is the introductory manual plasma cutter that is powerful enough to handle tough cutting jobs without dealing with complicated set-up and operation. Cut through mild steel, stainless steel or aluminuim grates and plates with ease.

INTUITIVE LCD DISPLAY.
The HandyPlasma panel is totally user-friendly with a 2.8” color LCD screen, that clearly displays all settings you need to see at a glance – cutting mode, input voltage, and input air pressure.

ALL IN ONE KNOB.
Complete with the functions necessary for any cutting job, HandyPlasma cutting machine is simple and quick to set up with just one knob:

1. Select the desired mode for torch control,
2T – On/Off
4T – Lock-on

2. “Select “grate” or “plate” depending on the material you’ll be cutting – there is a specific setting for each!

3. You are ready to start cutting!

AIR REGULATOR.
The HandyPlasma comes with an automatic internal regulator that manages the air passing through the torch. It is not necessary to adjust the gas – the machine automatically detects the inlet and outlet pressure. It comes with an external air filter with a purge valve for removing excess oil in the compressed air.

CONSUMABLES.
A complete line of consumables has been specially developed to take advantage of the full potential of the HandyPlasma and keep it always ready for work.

TORCH INCLUDED.
The HandyPlasma comes ready to use, with a 60A torch and a five metre lead. This ergonimic torch features a trigger lock for greater safety and a choice of 2T/4T function on the machine panel. The automatic system purges gas after cutting, increasing the life of the consumables.

Most Popular

To Top